Rustoleum CombiPrimer Tack Coat 3302 is an adhesion coat based on a solvent containing acrylic that Makes the smoothest surface coatable!

Reccomended Use

Rustoleum CombiPrimer Tack Coat 3302 should be used on galvanised steel, stainless steel, aluminium, copper, glass, porcelain and other smooth, dense surfaces followed by Rustoleum CombiColor Original or Multi-Surface. CombiPrimer Tack Coat 3302 is primarily intended for brush application.

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure cleaning in combination with appropriate detergents. Remove previous coatings completely. Remove salts, 'white rust', etc., by washing with Rustoleum Surfa-Etch 108 Etching Solution. The surface must be clean and dry during application.

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dewpoint.

Application & Thinning: Brush

Use natural bristles, longhair brushes.

Cleaning of Equipment / Spills

Use Rustoleum Thinner 160.