Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)
Coo-Var Suregrip anti-slip floor paint is a ready-mixed floor coating for suitably primed concrete, wood, metal and GRP which provides a rough, anti-slip finish when dry. Suregrip provides durability, decoration and protection. Suitable for indoor and outdoor use.
- Helps Prevents Accidents
- Available in 9 colours
- Suitable Surfaces: Wood, Metal, Concrete, GRP
- Finish: Aggregated
- Application: Roller or brush
- Drying time: Touch Dry 6 hours or 24 hours hard dry
- Overcoat time: 16 hours or overnight
- Estimated Coverage: 6-10m² per litre
Coo-Var® Suregrip® is a safety coating suitable for indoor and outdoor use where a sure foothold is required. Ideal for boats, steps and stairways, disabled ramps, doorways, machinery areas, most floors and other areas where moisture and other substances may cause the floor to be slippery. Suitable for use on suitably prepared concrete, wood, metal and GRP. For foot, light truck and occasional heavy truck use.
All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Apply a 10% thinned coat of CooVar Floor Paint to prime and seal the surface prior to applying Coo-Var® Suregrip®. Other surfaces have to be prepared and primed with the suitable primer for that substrate.
Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
- Brush or Short/medium roller
- Do not thin
- Stir well before use. Do not use mechanical shaker!
- 1L, 2.5L & 5L
- White, Black, Grey, Yellow, Green, Blue
- 6 - 10 sq.m / litre
60 - 100 micron d.f.t (based on brush application)
- For Use On
- Recoat Time (20°c)
Data Sheets Available for Download:
No customer reviews for the moment.