All orders come with free lifetime technical support.
Orders placed before 12pm dispatched same day.

Call us 01392 822600

Axalta ViterFloor 300 - Epoxy Floor Coating

Name: Axalta ViterFloor 300 - Epoxy Floor Coating
Brand: Axalta Coating Systems
SKU: AXA-VF3
Price: 94.30 GBP
Availability: PreOrder

£94.30

Tax excluded

£113.16 Tax incl.

Ideal for: Concrete floors in heavy engineering, food processing/brewing, pharmaceutical, & other industries.

Axalta ViterFloor 300 is a two pack epoxy, solvent free, high build coating for new & old concrete floors. It is highly resistant to abrasion and resistant to water, oils, weak solutions of non-oxidising acids, alkali and salt solutions, and temporary splashes of oxidising acids and bleaches.

For new or old concrete floors subject to heavy mechanical and/or chemical attack ViterFloor 300 is the ideal floor coating. Resistant to abrasion, a range of corrosives, and featuring a high gloss easy to clean finish. It previously held certification for ‘Ease of Decontamination’ in the nuclear industry.

Custom Colour

Please enter your required colour into the box below and click Submit Colour
You can find our colour charts here

Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

Axalta Viterfloor 300 is our best-selling floor coating for industrial clients. It is a tintable two pack solvent free epoxy floor coating. Highly resistant to abrasion, this product can be applied in thicknesses ranging from 200 to 500 microns and is primarily used as a high build coating for concrete floors.

Suitable for a range of demanding environments it is highly resistant to abrasion, medium-heavy traffic, and resistant to water, oils, weak solutions of non-oxidising acids, alkali and salt solutions. It is also resistant to temporary splashes of oxidising acids and bleaches.

This floor coating can also hold an aggregate to provide an anti-slip surface where required. An aggregate can be broadcast into the wet coating and allowed to dry. Alternatively, certain aggregates can be mixed with the coating prior to application and rolled onto the floor.

This product can also be supplied in a self-levelling variant. If you are interested in purchasing the self-levelling product, please call or email our team to arrange the order.

Features:

Solvent free with zero VOC’s
Accepts light traffic after 16 hours (@23oC)
Application by trowel or roller

ViterFloor 300 should be applied over Axalta ViterFloor 400 primer/sealer for a complete, resistant concrete floor system.

Reference AXA-VF3

Data sheet

Type: Epoxy
Size: 5L
Colour: Tintable to many colours
Finish: Gloss
Coverage: 4.95 m2/litre
For Use On: Concrete
Application Method: Roller
Recoat Time (20°c): 24hrs
Interior/Exterior: Interior

Specific References

ViterFloor 300 Data Sheets Available for Download:

Application Guide

Surface Preparation

All surfaces must be clean, dry, and free from grease, oil, dust and other contamination
Apply over ViterFloor 400 primer/sealer – consult relevant Product Data Sheet for details

Mixing

Must be mixed thoroughly by using a mechanical mixer (with side scraper) before use. Add hardener in the correct proportions and mix thoroughly for a minimum of 2 minutes. Mix the material just before use, and consider the area to be coated and pot life of the material when deciding how many units are required

Note: do not scrape or pour out remaining residues of mixed material from the bottom and sides of the container onto the floor, as this material may be incompletely mixed and cause ‘soft spots’ in the applied floor coating

It is recommended that all material is stored at a temperature of approximately 20ºC for at least 24 hours prior to use, to aid mixing and application

Thinner

Do not thin

Application Conditions

Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the substrate temperature should remain at least 3oC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.

Application Methods

This product is recommended for application by serrated or steel trowel, felt or mohair roller, with brush being used only where required to cut-in around edges or for very small areas

Pour out the mixed ViterFloor 300 onto the primed floor and spread with a suitable trowel. Level with a mohair or felt roller, wearing spiked shoes to walk across the wet coating

Product Notes

Priming: apply over ViterFloor 400 primer/sealer – consult relevant Product Data Sheet for details

Anti-slip: dependent on the degree of anti-slip required, aggregate can be broadcast onto the wet coating surface and allowed to dry. Surplus nonadhering particles should then be brushed off and further coats of ViterFloor 300 applied (if required) to encapsulate the particles. Please note that the higher the degree of anti-slip, the lower the ease of cleaning will be

Do not apply or cure below 5oC, temperatures above 10oC recommended