Orders before 12pm dispatched same day
Orders before 12pm dispatched same day
Coo-Var Acrylic Floor Paint is a fast drying, water-based coating for the purpose of light truck traffic use. This product can be used on interior and exterior surfaces and is available in 5 different colours.
Best uses
Coo-Var Acrylic Floor Paint can be used on a range of substrates including concrete, tarmac, asphalt, wood, walls, metal and brick. As an easy application coating, this product is available in semi-gloss finish.
Coo-Var Acrylic Floor Paint is a water thinned floor paint. Easy to apply and fast drying with low odour. Can be used on tarmac as well as concrete, asphalt, wood, walls, window ledges, bricks or metals. Based on water as a solvent. For foot and light truck traffic use. For use inside or outside.
Surface Preparation
All surfaces should be clean, dry, sound and free from contaminants. Concrete – power floated, granolithic and smooth surfaces should be roughened first to provide a good “key” for the paint. This can be done mechanically by abrading or blasting, or chemically, using an Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance.
New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces – Surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.
Application Conditions
As dictated by normal good painting practice. Do not apply if the temperature is likely to drop below 7°C during application or during the drying process. In confined spaces, provide adequate ventilation during application and drying.
Recommended Uses
Tarmac
Concrete
Asphalt
Wood
Walls
Window ledges
Bricks
Metals
Data sheet
Specific References
No customer reviews for the moment.