Orders before 12pm dispatched same day

Call us 01392 822600

PPG - Vikote 56 - Finish Coat

Review (0)

£76.28

Tax excluded

£91.54 Tax incl.

PPG - Vikote 56 is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F).

Custom Colour

Please enter your required colour into the box below and click Submit Colour
You can find our colour charts here

Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

Features

Finish coat for above-water areas
Good gloss and color retention
Resistant to water and splash of mild chemicals
Fast-drying
Can be applied at low temperatures, down to –10°C (14°F)

Recommended Substrate Conditions and Temperatures

Substrate conditions

Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination

Substrate temperature and application conditions

Substrate temperature during application should be at least 3°C (5°F) above dew poin

Instructions For Use

Stir well before useThe temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
Adding too much thinner results in reduced sag resistance
Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)

Air spray

Recommended thinner

THINNER 21-06

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

1.8 – 2.0 mm (approx. 0.070 – 0.079 in)

Nozzle pressure

0.2 - 0.3 MPa (approx. 2 - 3 bar; 29 - 44 p.s.i.)

Airless spray

Recommended thinner

THINNER 21-06