Orders before 12pm dispatched same day

Call us 01392 822600

PPG - Sigmadur ONE - Polyester Topcoat

Review (0)

£56.92

Tax excluded

£68.30 Tax incl.

PPG - Sigmadur ONE - Polyester Topcoat is a one pack urethane polyester finish coat for on board maintenance on topsides, decks and superstructures.

Custom Colour

Please enter your required colour into the box below and click Submit Colour
You can find our colour charts here

Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Sigmadur ONE - Polyester Topcoat is a one pack urethane polyester finish coat for on board maintenance on topsides, decks and superstructures.

Features

Prereacted binder, no free isocyanates added
Easy application
Excellent flow and levelling properties
Recommended application is by brush and roller only
Quick-drying
Good adhesion on most aged, sound alkyd, chlorinated rubber and epoxy coatings
High gloss
Good color and gloss retention

Recommended Substrate Conditions and Temperatures

Substrate conditions

Previous coat (alkyd, epoxy or polyurethane) must be dry and free from any contamination
Previous coat: surface should be sufficiently roughened if necessary

Substrate Temperature & Application Conditions

Substrate temperature during application should not exceed 50°C (122°F)
Substrate temperature during application should be at least 3°C (5°F) above dew point

Instructions for Use

Stir well before use
The temperature of the paint should preferably be above 15°C (59°F)
Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)

Brush/roller

Recommended thinner

THINNER 21-06