- New
Orders before 12pm dispatched same day
Orders before 12pm dispatched same day
Impralan Topcoat D100 is a water based top coat with extremely high covering power and weather resistance.
Custom Colour
Please enter your required colour into the box below and click Submit ColourImpralan Topcoat D100 is a water based top coat with extremely high covering power and weather resistance.
Recommended Use
For interior and exterior wooden components, especially for dimensionally stable wooden components such as windows
Features
Surface Preparation
The substrate must be clean, solid and load-bearing. The wood moisture content should be 12% - 14%. If necessary, wash with universal thinner beforehand.
Depending on the requirements of DIN 68800, protect exterior wood against blue stain and rot with an impralan primer containing active ingredients.
Application Instructions
Stir well before use. Use a suitable abrasive for intermediate sanding (grit 180-220). To avoid uneven moisture absorption, coat all sides of wooden components. Do not apply and dry below + 10° C (ambient air, substrate, and material) and not in direct sunlight.
The compatibility of sealants with impralan topcoats must be checked. Sealants based on silicone or butyl rubber are suitable. The adhesion of sealants for connection joints must be checked in advance on the coating.
When used on woods with a high content of wood ingredients, such as meranti or oak, discolouration may occur. In this case, an insulating intermediate coat is required.
Data sheet
Specific References
No customer reviews for the moment.