Coo-Var Floor Paint is a resilient and hardwearing single pack floor coating designed to be versatile, easy to use and economical in decorating and protecting surfaces including floors. Suitable for indoor and outdoor use, CooVar Floor Paint is compatible over most previous coatings and gives an off gloss finish. 12 colours available.

Recommended Use

Coo-Var Floor Paint is suitable for use on wood, metal, concrete or glass reinforced plastic. Floors, walls, ledges and stairways indoors and outdoors. For foot and light truck traffic use. Coo-Var Floor Paint protects against dirt, grime, oil, dust and some solvents. Please contact Technical Services for other surfaces. Not recommended for use on asphalt, bituminous surfaces or on thermoplastic floor tiles.

Surface Preparation

All surfaces should be clean, dry, sound and free from contaminants. Concrete - power floated, granolithic and smooth surfaces should be roughened first to provide a good "key" for the paint. This can be done mechanically by abrading or blasting, or chemically using Coo-Var Acid Etch. These processes will have the advantage in addition to preparing the surface of also removing dirt and laitance. New concrete must be allowed to cure thoroughly which can take up to 3 months. Other surfaces have to be prepared and primed with the suitable primer for that substrate. Existing painted surfaces - Surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose and flaking material and treat bare areas as new substrate and prepare accordingly.

Mixing Instructions

Mix well before use. 

Application Conditions

As dictated by normal good painting practice. In confined spaces, provide adequate ventilation during application and drying.

Preceding Coat

Coo-Var Penetrating Wood Primer on wood, Coo-Var Zinc Phosphate Metal Primer on ferrous metals, 10% thinned Coo-Var Floor Paint or CooVar Alkali Resisting Primer on concrete. 

Subsequent Coat

Coo-Var Floor Paint