Rustoleum 5478 - Asphalt Restorer is a one component high quality bitumen based coating with fillers and special flowadditives. For refurbishing car parks, driveways and footpaths.

Features:

• Upgrades drab, grey, stained asphalt and tarmac
• Provides an ‘as new’ appearance
• Covers old line markings and repairs
• Avoids disruptive and costly re-surfacing

Surface Preperation 

Surfaces should be dry and free of any loose material.Moss etc. should be removed by scraping and/or jet washing and the surface left to dry thoroughly.

Directions For Use 

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions 

Do not apply during rainfall. Protect from rain for at least 30 minutes after application.

Application & Thinning: Brush

The product should be applied generously but evenly in one coat using a roller or brush. Small pits and fissures can be filled with a stiff mortar consisting of dry sand mixed with the product. Pits and fissures should be primed with the product 5478 before trowelling in the mortar.

Applicatin & Thinning: Roller 

The product should be applied generously but evenly in one coat using a roller or brush. Small pits and fissures can be filled with a stiff mortar consisting of dry sand mixed with the product. Pits and fissures should be primed with the product 5478 before trowelling in the mortar.

Theoretical Coverage 

5 - 10 m² per 5 litres, depending on the surface.

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate, size of the leakage and material losses during application.

Dry Times By 20º C/RV 50%

• Touch dry: 30 minutes
• Dry to recoat: 2 - 5 hours
• Fully cured: 2 - 5 hours.

Rain will delay curing by trapping solvents within the coating.