Rust-OleumHard Hat® Aerosols Transparent Topcoat 2500 is a non-yellowing coating, based on fast drying acrylic resin. 

RUST-OLEUM Transparent Topcoat 2500 should be applied over RUST-OLEUM Hard Hat Fluorescent Topcoats 2200 or Metallic Topcoats 2100 or can be used to restore the gloss of faded old coatings. RUST-OLEUM Transparent Topcoat 2500 can be applied direct on several metals like: aluminium, brass, bronze, chrome and copper. RUST-OLEUM Transparent Topcoat 2500 is intended for small maintenance jobs or for touch-up. RUSTOLEUM Transparent Topcoat 2500 should be used in light industrial exposures, normal humidity and interior applications.

Features

• Non-yellowing (UV resistant)
• Quick drying (10-15 min.)
• Protective layer for many metal surfaces
• Gloss repair of old coatings
• Provides extra durability to metallic and fluorescent coatings

Surface Preparation

Remove dirt, grease, oil and all other surface contaminants by appropriate means. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application.

Application Conditions

For good results the relative humidity shall be below 85% and the temperature of the can above and substrate 0°C.

 Application & Thinning: Aerosol

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve