Biodex Sheen is a tough, semi-gloss hygienic coating which prevents the growth of micro-organisms and limits the spread of harmful germs through an innovative combination of encapsulated in-film protectant and silver ions.
Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)
BIODEX SHEEN is a non-toxic, non-leaching biostatic hygienic coating which is based on the latest dual action chemistry with in-film protection, in addition to a silver ion active component to give effective anti-microbial performance and resistance to germs. The advanced acrylic micropolymer resin binder cross-links to give excellent adhesion which remains unaffected even when substrate moisture escapes to atmosphere through the membrane.
Water-based hygienic coating for walls and ceilings which prevents the growth of micro-organisms. It is also CEMarked in accordance with BS EN 1504-2.
Benefits from the latest dual action mechanism to protect against the growth of micro-organisms and to provide added protection from germs. BIODEX SHEEN is a safe, nonleaching biostatic formulation. It is suitable for walls as well as ceilings in all industries where strict standards of hygiene are observed. Suitable for surface protection systems principles 2.2, 8.2 as defined in BS EN 1504 Part 2.
Usage & Highlights
- Unique dual action in-film protection combined with silver ion technology.
- Independently tested against a wide range of microorganisms.
- Totally non-toxic, non-leaching and non-tainting formulation.
- Vapour permeable to allow substrate moisture to escape.
- Attractive mid-sheen finish with fast drying properties for rapid installation.
- Produces a tough and flexible film which is easily reinforced over cracks as well as joints.
- Safe, water-based, low odour, minimal VOC coating. Equipment easily cleaned with water.
- Durable, low maintenance coating, easy to maintain and refurbish.
The areas to be treated must be free from unsound material, i.e. dust, oil, grease, mould release agents, corrosion byproducts and organic growth. Mechanically remove surface laitance and any soft, sandy or flaking material. Use techniques to achieve the required degree of preparation, such as wet grit or water blasting techniques or equivalent approved methods. Seal blow holes and surface defects in existing concrete using MONOLEVEL FC or MONODEX ICB. Flexcrete Concrete Repair Mortars must be allowed to cure for a minimum of 24 hours.
Substrates contaminated by mould, algae, mildew, bacteria, etc., require pre-treatment with BIODEX WASH. Visible areas of growth and associated underlying loose paint or substrate must be removed by mechanical means and the substrate treated with BIODEX WASH.
- Biostatic Coat
- 6 m²
- For Use On
- Application Method
- Brush, Roller & Spray
Data Sheets Available for Download:
No customer reviews for the moment.