Maker Coating Zinc Rich Primer - 500ml is a high quality zinc coating with more than 90% zinc share in the dry film. Resistant to heats of up to 350°c.

Part of a wide range of Maker Coating aerosols.

Key Features:

• High quality zinc coating with more than 90% zinc share in the dry film
• Cathodic corrosion protection for all bare metals providing resistance to the highest demands against corrosion.
• Resistant to heats of up to 350°c
• Fast drying
• Highly suitable for welding seams
• Resistant to petrol, chemicals and weather influences

Surface Preparation

The surface must be free from all contamination including rust, grease and moisture. Before application, ensure that the mixing balls in the aerosol are moving freely as this ensures that the zinc content is being physically mixed into the paint. 

Product Type:

Epoxyester

Coverage:

1.56 - 2.19m² per 500ml

Drying times:

• Dust Free 10 - 15 minutes
• Touch Dry 20 - 30 minutes.
• Overcoatable after 24 hours.
• Resistant to heat after 8 - 12 hours.

The drying time depends on temperature, humidity and the thickness of the applied coat.*