Rustoleum Galva Expresse 2180 Anti Corrosion Primer is a fast drying zinc rich primer based on a styrene-acrylic resinthat provides excellent protection against corrosion.

Features

• Protection and quick drying in one
• Tack free after just 5 minutes, to handle after 10 minutes
• Ideal for production and construction environments
• Resists 400 hours of salt spray testing (DIN 50021 SS)

Reccomended Use

RUST-OLEUM Galva Expresse 2180 should be used on new, bare steel or galvanised steel surfaces. RUST-OLEUM Galva Expresse 2180 is intended to be applied on small areas or for touch-up. RUST-OLEUM Galva Expresse 2180 can be recoated with non-saponifiable coatings. RUST-OLEUM Galva Expresse 2180 should be used as a primer or as a single coat in light industrial exposures, corrosive environments and high humidity areas.

Surface Preperation

Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

Application Conditions 

For good results the relative humidity shall be below85% and the temperature of the can and substrate above 0°C. .

Application & Thinning: Aerosol 

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply a full, wet coat to achieve a close, dense coating film, avoid dry spray. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.

Theoretical Coverage 

1.4 m² per spray can at 35 µm dry

Practical Consumption 

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.