We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    PPG - Vikote 56 - Finish Coat
    • PPG - Vikote 56 - Finish Coat

    PPG - Vikote 56 - Finish Coat

    Review (0)
    £61.26
    Tax excluded
    £73.51 Tax incl.

    PPG - Vikote 56  is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F).

    Custom Colour

    Please enter your required colour into the box below and click Submit Colour
    You can find our colour charts here
    • 250 char. max
    Size :
    Product Group :
    Finish :
    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    PPG - Vikote 56  is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F).

    Features

    • Finish coat for above-water areas
    • Good gloss and color retention
    • Resistant to water and splash of mild chemicals
    • Fast-drying
    • Can be applied at low temperatures, down to –10°C (14°F)

    Recommended Substrate Conditions and Temperatures

    Substrate conditions

    • Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination

    Substrate temperature and application conditions

    •  Substrate temperature during application should be at least 3°C (5°F) above dew poin

    Instructions For Use

    • Stir well before useThe temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
    • Adding too much thinner results in reduced sag resistance
    • Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)

    Air spray

    Recommended thinner

    THINNER 21-06

    Volume of thinner

    5 - 10%, depending on required thickness and application conditions

    Nozzle orifice

    1.8 – 2.0 mm (approx. 0.070 – 0.079 in)

    Nozzle pressure

    0.2 - 0.3 MPa (approx. 2 - 3 bar; 29 - 44 p.s.i.)

    Airless spray

    Recommended thinner

    THINNER 21-06

    Volume of thinner

    0 - 5%, depending on required thickness and application conditions

    Nozzle orifice

    Approx. 0.28 – 0.33 mm (0.011 – 0.013 in)

    Nozzle pressure

    12.0 - 15.0 MPa (approx. 120 - 150 bar; 1741 - 2176 p.s.i.)

    Brush/roller

    Recommended thinner

    THINNER 21-06

    Volume of thinner

    0 – 3%

    Cleaning solvent

    THINNER 21-06

    PPG Paints
    PPG-V56

    Data sheet

    Type
    Modified Acrylic Finish
    Size
    5L & 20L
    Colour
    Tintable to many colours
    Finish
    Gloss
    Coverage
    10.0m2 per litre for 35µm
    Application Method
    Brush, Roller, Airless Spray or Air Spray
    Recoat Time (20°c)
    Minimum 4 hours at 20°C

    Specific References

    Data Sheets Available for Download:


    No customer reviews for the moment.

    Write your review
    PPG - Vikote 56 - Finish Coat

    You might also like

    16 other products in the same category:

    arrow_back
    arrow_forward
    PPG - Vikote 56 - Finish Coat

    PPG - Vikote 56 - Finish Coat

    £61.26
    Tax excluded
    £73.51 Tax incl.