Orders before 12pm dispatched same day
Orders before 12pm dispatched same day
Thinners No 3 is a solvent blend to optimise the thinning, cleaning and application properties of Corroless coatings.
Thinners No 3. for use with Corroless RF16
Corroless Thinners No. 3 is a solvent blend to optimise the thinning, cleaning and application properties of Corroless coatings. See the relevant product data sheet for recommended thinners.
Corroless Thinners No. 3 is part of a range of dedicated solvent blends to optimise the thinning, cleaning and application properties of Corroless coatings.
Health and Safety
The product is flammable. Fire-water run-off in sewers may create fire or explosion hazard. Vapours are heavier than air and may spread near ground and travel a considerable distance to a source of ignition and flash back. Control run-off water by containing and keeping it out of sewers and watercourses.
In case of fire: Evacuate area. No action shall be taken without appropriate training or involving any personal risk. Cool containers exposed to heat with water spray and remove them from the fire area if it can be done without risk.
No action shall be taken without appropriate training or involving any personal risk. Evacuate area. Keep unnecessary and unprotected personnel away from the spillage. Do not touch or walk into spilled material. Eliminate all ignition sources if safe to do so. No smoking, sparks, flames or other sources of ignition near spillage. Do not breathe gas, fume, vapours or spray. Provide adequate ventilation. If ventilation is inadequate, suitable respiratory protection must be worn. Use protective equipment appropriate for surrounding materials.
Small Spillages: Stop leak if safe to do so. Move containers from spillage area. Absorb spillage with non-combustible, absorbent material. Place waste in labelled, sealed containers. Large Spillages: Eliminate all ignition sources if safe to do so. Stop leak if safe to do so. Move containers from spillage area. No smoking, sparks, flames or other sources of ignition near spillage. Avoid the spillage or runoff entering drains, sewers or watercourses. Dispose of waste via a licensed waste disposal contractor. The contaminated absorbent may pose the same hazard as the spilled material.
For more information contact us here.
Data sheet
Specific References
No customer reviews for the moment.