Coo-Var Anti-Graffiti is an easy no fuss way to create a graffiti resistance surface.
This kit contains all you need to mix and apply the coating: WB101 2.5kg, brush, mixer, paddle, gloves and instructions. Covers approximately 18 square metres Kit covers 14 – 18 square metres with one coat.
Coo-Var WB101 is a water based polyurethane two pack antigraffiti coating for interior or exterior use. Low odour and fast drying. WB101 can be used over compatible coloured paints. Dries to a hard, easy to clean finish.
RECOMMENDED USE: ideal for bridges, walls, subways, public toilets and stadiums. Ideal where a water based product is required.
SURFACE PREPARATION: All surfaces should be laitance free, clean, dry, sound and free from contaminants. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate “key” is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.
- For interior and exterior use.
- Low odour and fast drying.
- Can be used over compatible coloured paints.
- Dries to a hard, easy clean finish
- For exterior use
- Suitable Surfaces: Wood, Brick, Masonry, Plaster
- Finish: Off Gloss
- Drying time: Touch Dry 1-2 hours or 24 hours hard dry
- Overcoat time: 18 hours
- Estimated Coverage: one kit covers approximately 18 square metres
Two Pack Water Based polyurethane resin system
Gloss clear finish.
For more information contact us here.