- New
Orders before 12pm dispatched same day
Orders before 12pm dispatched same day
Rustoleum Hard Hat 2169/2182 Anti-Rust Primer are fast drying primers based on a short oil soya alkyd. The products contain rust-inhibitive pigments and are leadand chromate free.
Rustoleum Hard Hat 2169/2182 Anti-Rust Primer are fast drying primers based on a short oil soya alkyd. The products contain rust-inhibitive pigments and are leadand chromate free.
Reccomended Use
RUST-OLEUM Red Primer 2169 / Grey Primer 2182 should be used on new, bare or slightly rusted steel surfaces. RUST-OLEUM Red Primer 2169 / Grey Primer 2182 are intended to be applied on small areas or for touch-up. RUST-OLEUM Red Primer 2169 / Grey Primer 2182 should be used in light industrial exposures, normal humidity and interior applications and should be recoated with RUST-OLEUM Hard Hat Topcoats.
Surface Preparation
Remove dirt, grease, oil, loose rust and all other surface contaminants by appropriate means. Sand intact coatings to roughen the surface slightly. The surface must be clean and dry during application.
Application
Application & Thinning: Aerosol
Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. Hold can approx. 25 cm from surface. Use back and forth motion keeping can parallel with surface. Ensure that can is in motion when spray button is pressed to avoid runs and sags. Apply several thin layers at a few minutes interval to achieve adequate coating thickness. After use turn can upside down and press spray button for 2 - 3 seconds to clean valve.
Data sheet
Specific References
No customer reviews for the moment.