Teknos Teknoceiling 02 is a water based wall paint and ceiling paint paint for use as a top coat on dry, interior surfaces, such as on ceilings in apartments and office rooms, walls and ceilings in storerooms and factories.

Surface preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. Remove all of the old paint from the surfaces which have been painted with glue paint or lime wash. Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. For smoothing of irregularities in the surface choose a suitable stopper from the TEKNOSPRO series. The dried stopper is sanded down and the dust removed.

Application

Before use stir the paint thoroughly. The paint is thinned with water when needed. Apply once or twice by brush, roller or spray.

Application conditions

The surface to be painted has to be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +5°C and the relative air humidity below 80%.

Good ventilation during the application and drying period quickens the drying process.

Drying time at +23°C / 50% RH

• Dust free: after ½ hour
• Overcoatable: after 1 hour

The drying will be slowed down if the air is cool and/or humid.

Theoretical coverage

Applied once onto a smooth surface: 5 - 8 m²/l