Teknos - Timantti 20 - Water-Borne Acrylate Paint for walls and ceilings indoors. Mildew-resistant. Finish: semi-matt. The paint is together with TIMANTTI W moisture sealer included in a coating system for wet rooms, approved by the Swedish Måleribranschens Våtrumskontroll (MVK).

Recommended Use

Especially suited for use on walls and ceilings in dry and humid spaces where good washability and abrasion resistance is required, e.g. in kitchens, bathrooms, halls, staircases, kindergartens, schools, hospitals, food processing premises and other similar facilities. TIMANTTI 20 can be applied to primed concrete, plaster, filler, brick, and building board surfaces according to the painting directions. The paint is also suitable for repainting old alkyd and dispersion paint coats.

Surface Preparation

Clean the surface from dirt and dust. Wash previously painted, dirty surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed.

Application

HUMID AREAS: Prime concrete, plaster, stopper, brick, and building board surfaces with TIMANTTI W moisture sealer according to the directions for use. IN DRY AREAS prime the surfaces previously mentioned with TIMANTTI 3 Primer. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. Prime galvanized surfaces with TIMANTTI 3 Primer. Before use stir the paint thoroughly. The paint can be diluted with water, if required, but dilution may impair the coverage of the paint. Apply by roller, spray or brush. Recommended nozzle size for airless spray is 0.017 - 0.021".

Application Conditions

The surface to be painted must be dry. During the application and drying period the temperature of the ambient air, the surface and the paint shall be above +10°C and the relative air humidity below 80%. Drying is faster in low air humidity and/or above + 21°C. Application will be easier if air is humidified and/or temperature is lowered in the working space. Ventilation after the painting will quicken the drying

Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.

About us

Maker Coating Systems Ltd is a Devon based, family run business that began in 1979, since then we’ve become a leading independent distributor of specialist maintenance and refurbishment products throughout the South of the UK. We supply a huge range of quality materials to successfully resolve virtually any maintenance and refurbishment issue, whether it involves refurbishment of marine structures, civil engineering issues, refurbishment of floors, water proofing flat and shallow pitched industrial roofs, cladding maintenance, concrete repairs, anti-corrosion work or chemically resistant products, we can provide the systems to allow the long term, successful completion of the project. Our product ranges are drawn from well-known manufacturers that have a solid track record in the production of quality products.