Tor -  Elastaseal Z Binder Sealer (RC144) is a two component, clear/gloss, moisture curing polyurethane resin solution for use as an all-aliphatic stabilising sealer and primer on a wide range of substrates such as concrete, asphalt, bitumen, felt, asbestos, plaster, render, etc. 

Application

Apply Tor Elastaseal Z Binder Sealer using either a brush or roller.  Two coats may be necessary on highly porous substrates. Do not thin.

Surface Preparation

All surfaces to be treated should be clean, sound, dry (preferably less than 5.5 on the Protimeter concrete moisture scale), sound and free from laitance, dirt, dust and other contaminants (note: deeply contaminated substrates may require special treatment).

Rake out loose and friable materials and make good with a suitable proprietary filler or repair compound.

Bare concrete surfaces should be suitably prepared (e.g. abrasive blast, disc grinding, scabbling, sanding, etc.) to give a clean, open textured surface.

All previously coated areas should be carefully inspected. Where necessary, any residual coatings should be completely removed to promote good substrate adhesion. Any firmly adhering coatings must be inspected and application tests carried out to verify proposed system adhesion. If adhesion is unsatisfactory complete removal of coatings may be required unless an alternative spot primer can be used.

Treat any areas of moss or fungal attack with Torkill “W” Fungicidal Solution DM405.