Tor - Elastaseal Z Embedment Coat is a high build, heavy duty coating, free from solvent odour,  that provides durable, long term protection for roofs. To be used as a fully reinforced weatherproofing system.

Elastaseal Z Embedment Coat can be used as the basecoat in Elastaseal Z roof waterproofing membrane systems. A high build, heavy duty coating that is free from solvent odour that provides durable, long term protection for roofs.  To be used as a fully reinforced weatherproofing system.

Cold applied single pack, ultra high solids moisture activated elastomeric  urethane coating free from solvent odour.

Application

Apply with a brush or roller. Apply at the prescribed system coverage rate to properly prepared areas. Immediately lay Elastamat glass fibre matting into applied coating, ensuring a minimum overlap of 50mm between sheets. Then Roll or tamp the surfaces to ensure full integration and saturation of the matting is achieved. Finally, allow Embedment Coat to become firm before applying Elastaseal Z Top Coat(s).

Surface Preparation

Inspect all surfaces to assess soundness of existing substrates or coatings.  Where necessary prepare test areas. Roof surfaces must be clean, dry and free from all loose debris and be carried out before application of the coating.  Similarly, all areas of fungal growth, moss etc should be treated with Torkill W Fungicidal Wash (DM405) and neutralised residues removed. Then, apply over Elastamat reinforced Embedment Coat (where necessary). Priming, where necessary should be carried out using suitable compatible materials.