How it Works

Intulac Ultra Base Coat is designed to form a protective carbon char in the event of fire, delaying the inflammation of the wood. It reduces ignitability of soft and hard wood and other wood derivatives I.e. plywood, chipboard, fibre insulation board, hard board and also on veneering ≥ 12mm thickness. It also insulates against heat, checks fire, prevents propagation of fire and diminishes flue-gas density and flue-gas temperature.

NB: Bollom Intulac Ultra Basecoat must be overcoated with Bollom Intulac Ultra Topcoat after 48 hours and not more than 4 days. It is important to speak to our Technical Department and refer to the product data sheet prior to using this product to ensure the correct specification has been chosen for your surface.

Features and Benefits

• 1 x 5lt of Bollom Intulac Ultra Basecoat and 1 x 500ml of Bollom Intulac Ultra Topcoat is sufficient to apply the specified 3 coat system to 12.5m²
• Can be applied over existing varnish – Maximum of four, single, well-adhered coats
• Simple 3 coat system to achieve Class 0
• Single pack products so no mixing required
• Protects and highlights the natural beauty of the wood – ideal for timber in communal areas.
• For interior use only. Not suitable for surfaces exposed to mechanical stress, such as floors, doors, stairs etc.

Coverage and Application

Bollom Intulac Ultra Topcoat should be applied undiluted by brush, roller or spray. Surfaces to be painted must be primed with Bollom Intulac Ultra Intumescent Base Coat
and dry, free from dust, oil, wax, grease and release agents. Apply two coats of Bollom Intulac Ultra Basecoat to a coverage rate of 5m² per litre, per coat (this means a 5lt tin will cover a total of 12.5m² after the two coats). The Intulac Ultra system requires the application of both the Intumescent Base Coat and Protective Top Coat. The Intulac Ultra Basecoat must be left a minimum of 48 hours and max of 4 days prior to applying the Intulac Ultra Topcoat. Apply 1 coat of Bollom Intulac Ultra Topcoat at 25m² per litre (this means a 500ml tin will cover a total of 12.5m²).

How to get Fire Certification

It’s simple, just keep proof of purchase, batch numbers of the products used along with site details and contact Bollom Customer Services Department on 0191 410 6611 with the information and they will send you the relevant Certificate of Supply within 5 working days.

The Bollom Intulac Ultra range has been made with the professional painter and decorator in mind and all products are easy to apply and have been fire tested to BS 476 Parts 6, 7.