Coo-Var Oil Remover efficient cleaner designed to provide rapid release of oil and hydrocarbon contamination from floors, walls and other substrates. 

Reccomended Use

Coo-Var Water Based Oil Remover is an aqueous cleaner designed for use on floors, walls and other hard surfaces.  It rapidly releases heavy oils, hydrocarbons and ground-in dirt from surfaces such as concrete, brick and breezeblock.  Use to deep clean floor surfaces prior to the application of coatings, seals and other finishes. Also use to remove slip hazards following leaks and spills.

Features

• Water Based
• Environmentally Friendly
• Powerful Cleaning

Surface Preparation

Sweep floor to remove debris.

Mixing Instructions

Supplied ready for use.

Application Conditions

Apply liberally to the area to be cleaned. Work well into the surface with a stiff brush and leave for 20 to 60 minutes. Rinse the area well with a pressure washer or hose, collect the rinse water with a wet vac machine. Once the surface oil contamination has been removed, continue with any surface preparation as necessary i.e. mechanical abrasion or chemical etching as required to provide a key for a subsequent coating.

Subsequent Coat 

Allow the surface to dry thoroughly. This can take up to several days. Apply a suitable primer for the surface if overcoating.