Teknos Teknowall 05 is a full-matt water-borne acrylate dispersion paint for interior use with low side sheen, rich consistency and excellent hiding power.

TEKNOWALL05 can be applied to concrete,plaster, filler, brick and various building board surfaces. It is also suitable for repainting of old alkyd and dispersion paint surfaces.

Surface Preparation

Clean new surfaces from dust and dirt. Wash previously painted surfaces with RENSA SUPER paint cleaner. Matt down hardor gloss surfaces by sanding and thereafter remove the dust. Remove al lof the old paint from the surfaces which have been painted with glue paint or lime wash. For smoothing of irregularities in the surface choose a suitable filler from the TEKNOSPRO series. The dried filler is sanded down and the dust removed.

Priming

Spray filler ceilings, which are not waterproof, are recommended to be primed with solvent borne primer e.g. FUTURA 3 Adhesion primer. Paint concrete, plaster, filler, brick, chipboard, gypsum board and fibre board surfaces straight on with TEKNOWALL05 or prime with TEKNOPRIMER 03 primer. Steel surfaces are primed with FERREX AQUA anticorrosive paint.

Application Method

Brush, Roller, Spray

Application

Stir thoroughly before use. Apply once or twice by brush, roller or spray. Suitable airless nozzle size 0.017-0.021".

Application Conditions

The surface to be treated has to be dry. During the application and drying period the temperature of the ambient air, the surface and the product shall be above +5°C and the relative airhumiditybelow 80%. Goodventilationduringthe application and drying period quickens the drying process.