Rustoleum ND14 Cleaner & Degreaser is a professional grease and dirt removing substance that clears surfaces from contaminants before decorating. This product can also be used as part of a steam clean.

Features

• Removes grease, oil, proteins, dirt and other contaminants from coated, mineral and metal substrates
• Concentrated formulation can be diluted 1:20
• Use as additive for high pressure cleaning
• Non-flammable, virtually odour-free

Recommended Use

ND14 Cleaner/Degreaser should be used to remove grease, oil, proteins, dirt and many other surface contaminants from coated, mineral and steel substrates. Apply with an artificial sponge,cloth or stiff nylon brush or broom. Can also be used as an additive for high pressure (steam) cleaning.

Directions For Use

To ensure homogeneity shakewell before use. Scrape or sweep away grease, oil, dirt, mould and all other surface contaminations as much as possible. ND14 Cleaner/Degreaser can be applied diluted or concentrated with a sponge, cloth, brush or broom. For normal cleaning a 3 - 5% concentration will be sufficient.

The product should be diluted with cold water. After use rinsewith plenty of fresh water. If a concentration of more than 5% is used, hot water rinsing is absolutely necessary. As a high-pressure(steam)cleaning additive a 2% concentration is recommended.

After cleaning, remove any remaining water and allowthe surface to dry, as moisture left on the surface or entrapped into pores may cause premature failure of the coating system. Large surface areas or poor drying conditions may require longer drying times before a coating system can be applied.