Johnstone’s Stormshield Pliolite® based masonry paint is a solvent based paint for exterior use on cement rendering, rough cast, brick and concrete. It provides a smooth matt finish that has excellent adhesion to previously painted and suitably sealed surfaces. The Pliolite resin enables application at temperatures down to -5°C and becomes showerproof in 20 minutes (approx.), allowing all year-round exterior decoration.

Colour: Brilliant White or tintable to many shades.

Usage & Highlights

• Over 15 years life expectancy
• Showerproof in 20 minutes allowing all year-round application.
• A solvent based smooth matt coating for exterior walls.
• Excellent adhesion to previously painted or untreated porous surfaces.

Coverage

Johnstone's Trade Stormshield Piliolite Based Masonry Finish will cover approximately 6-10 square metres per litre depending on the nature and porosity of the surface being painted.

Film Thickness

Wet: 125μm

Dry: 41μm

Drying Time

Touch dry in 1-2 hours. Recoatable after 16-24 hours.

Surface Preparation

All surfaces to be painted should be clean, dry and free from loose and flaking material. Repair cracks and defective areas and treat fungal or algal growth with Johnstone's Sterilisation wash.

*15 Years Expected Life

Johnstone’s Stormshield Pliolite® based masonry provides protection for up to 15 years, provided it has been applied according to the instructions and onto properly prepared surfaces.

Application

Ensure maximum ventilation during application and drying. Stir well. Easy to apply by brush or roller. Seal absorbent surfaces with a coat of Johnstone's Trade Stormshield stabilising solution as directed. If one can of a colour is to be used in the same area, intermix before use.

Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.