Orders before 12pm dispatched same day
Orders before 12pm dispatched same day
Metal Cladding PVDF Primer is a super adhesion primer for cladding offering excellent adhesion on new or aged PVDF/PVF2 cladding.
Single pack super adhesion primer for PVDF or PVF2, galvanised steel, zinc and aluminum.
Recommended Use
On PVDF, galvanised steel, zinc, aluminium and other smooth surfaces. As adhesion primer under NOXYDE® or Metal Cladding Topcoat on newgalvanised steel.
Usage & Highlights
Technical Data
Density (g/cm³): 1,17
Gloss Level: Satin
Corrosion Class: C1/C2 lowprotection
Solids Content in weight: 47%
Solids content in volume: 30%
Dry Times By 20% C/RV 50%
Touch dry: 30 minutes
Dry to handle: 1,5 hours
Dry to recoat: 24 hours
Fully cured: 1 week
Recommended Wet Film Thickness
100 μm
Recommended Dry Film Thickness
30 μm
Surface Preperation
Remove grease, oil and all other surface contaminations by alkaline or high pressure cleaning in combination with appropriate detergents. Sand intact coatings to roughen the surface slightly. Remove zinc or aluminium corrosion with Surfa-Etch 108. The surface must be clean and dry.
Application Conditions
Apply in a dry and well-ventilated area.
Application & Thinning; Brush
Do not dilute.
Application & Thinning: Roller
Do not dilute.
Application & Thinning: Airless Spray
If necessary, dilute slightly with maximum 4% volume Thinner 22. Nozzle: 012 - 015 / Pressure: 180 - 200 bars.
Shelf Life
5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C
Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.
Data sheet
Specific References
No customer reviews for the moment.