Rustoleum - Metal Cladding Topcoat is a quality coating for metal surfaces. This single pack, water-based topcoat is ideal for use on any metal surface that has been previously primed with Metal Cladding Primer, PVDF Primer, NOXYDE® or PEGANOX®.

Features

• Improves life expectancy of metal cladding
• Easy to clean and maintain
• Excellent flow and aspect with brush, roller or spray High filling and hiding power
• Tintable in almost any colour

Surface Preparation 

Can be applied directly on substrates primed with Metal Cladding Primer, NOXYDE® or PEGANOX®. Can also be applied on old sound paints; glossy paints will be roughed up slightly. In all cases, the substrate must be sufficiently dry and clean. Apply 1 - 2 coats of theMetal Cladding Topcoat.

Directions For Use 

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.

Application Conditions

Temperature minimum 10°C / max. 80% R.H.

Application & Thinning: Brush: 

Apply undiluted in 2 coats by preference.

Application & Thinning: Brush 

Apply undiluted in 2 coats by preference. Use short nap roller.

Application & Thinning: Airless Spray

Nozzle: 013 – 015 / Pressure: 160 bar. 1 coat is sufficient in most cases, if there is no big colour differencewith the previous coat. If necessary dilutewith water. Check WFT and avoid over thicknesses, especially for dark colors. Too high film thickness can result in blistering.