RUST-OLEUM® Hard Hat 2800 - Spot Marking Aerosol is based on a fast drying acrylic resin, it provides quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.

Features

• Optimised for ground marking
• Extra large can for more linear metres
• Two finger nozzle for accurate writing
• Quick drying (5 - 10 minutes)
• Aromatic Free

Recommended Use 

RUST-OLEUM® Marking Aerosol 2800AE can be used on metal, concrete, asphalt, gravel, soil and grass, etc. RUST-OLEUM® Marking Aerosol 2800AE is not water-soluble and should be used in light industrial exposures, normal humidity and interior applications. RUST-OLEUM® Marking Aerosol 2800AE is designed for quick and easy marking of construction and excavation sites, underground utilities and for traffic safety.

Surface Preparation 

Remove dirt, grease, oil and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

Directions For Use 

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Shake frequently during use. It is not possible to clean the spray button in the usual way. Due to the use of the 360° valve this is not necessary.

Application Conditions

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Dry Times By 20º C/RV 50%

• Touch dry: 20 minutes
• Dry to recoat: within 1 hour or after 48 hours
• Fully cured: 7 days

Theoretical Coverage

750 ml” 2,25 m² per spray can at 25 µm dry (depending on colour)

Practical Consumption 

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.