Rustoleum - Hard Hat durable line marking paint is based on a fast drying short oil alkyd. It is ideal for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required.

Features

• For use with RUST-OLEUM line applicators
• Adjustable line width from 5 to 10 cm
• Light traffic possible after just 4 hours
• Adheres to asphalt, concrete, grass, metal, wood, etc.
• Also available in 500 ml

Recommended Use

RUST-OLEUM Lining Paint 2300 should be used in light traffic exposure. RUST-OLEUM Lining Paint 2300 is designed for use together with the Rust-Oleum Lining Machine. RUSTOLEUM Lining Paint 2300 is ideal for drawing lines in parking areas, plants, warehouses, sports fields, stadiums and all sites where traffic control is required.

Surface Preperation

Remove dirt, grease, oil and all other surface contaminants by appropriate means. The surface must be clean and dry during application.

Application Conditions 

For good results the relative humidity shall be below 85% and the temperature of the can and substrate above 0°C.

Application & Thinning: Aerosol

Remove cover cap. Shake vigorously for at least one minute after the rattle of mixing ball is heard. Turn can upside down and place into can-holder of the Rust-Oleum Lining Machine. See that spray head is properly placed into opening; the elongated part of the spray button should be parallel to thewheel axle. The can-holder is adjustable. When the holder is in its lowest position a line of approx. 5 cm wide can be drawn. When the holder is in the highest position thewidth of the line is approx. 10 cm. Intermediatewidths can be obtained by varying the position of the holder. Pull trigger handle to activate the spraying. Striping machine should be moving whilst spraying to prevent inside build up of coating material. After use turn can upright and press spray button for 2 - 3 seconds to clean valve.