Resideck DPM is a two-part epoxy resin-based primer/coating that works as a moisture barrier, enabling the speedy application of moisture-sensitive flooring. It has all the essential qualities to ensure that the underlying substrates are properly safeguarded.

Depending on the degree of dampness present in the sub-floor, one or two coats of Resideck Epoxy DPM can be applied. The product is available in grey, red, and clear to ensure uniform coverage. It is also suitable for priming damp, minimally prepared substrates.

Usage & Highlights

• Provides surface damp-proof membrane
• Allows rapid laying of floor toppings to power floated concrete
• Solvent free, low odour
• Coloured to monitor progress
• Can be applied on substrates of up 97% relative humidity
• Surface tolerant

Surface Preparation

Concrete surfaces shall be sound, clean and free from dust, laitance and other contaminants. Suitable mechanical treatments such as vacuum grit blasting is recommended to ensure the removal of contaminants and to provide a ‘key’ for the Resideck DPM. Moisture testing of the substrate in accordance with BS8203, shall be carried out on new concrete floors. A sub floor moisture reading of 97% R.H. can be accommodated by Resideck DPM. If readings exceed this figure, then the floor must be allowed to dry out further.

Mixing

Pour the contents of the CURING AGENT tin into the BASE container and thoroughly mix, preferably by mechanical means until a uniform colour and consistency is achieved.

Application

a) Two or three coat application (R.H.>92%). Apply a first coat of Resideck DPM red, by brush or roller to the prepared substrate at a nominal rate of 3 m²/kg Within 24 hours apply a second and as necessary a third coat at a nominal rate of 4 m²/kg

b) one or two coat application (R.H <92%) Apply a first coat of Resideck DPM red, by brush or roller to the prepared substrate at a nominal rate of 3 m²/kg. Within 24 hours apply a second coat at a nominal rate of 4 m²/kg

Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.

About us

Maker Coating Systems Ltd is a Devon based, family run business that began in 1979, since then we’ve become a leading independent distributor of specialist maintenance and refurbishment products throughout the South of the UK. We supply a huge range of quality materials to successfully resolve virtually any maintenance and refurbishment issue, whether it involves refurbishment of marine structures, civil engineering issues, refurbishment of floors, water proofing flat and shallow pitched industrial roofs, cladding maintenance, concrete repairs, anti-corrosion work or chemically resistant products, we can provide the systems to allow the long term, successful completion of the project. Our product ranges are drawn from well-known manufacturers that have a solid track record in the production of quality products.