Coo-Var Alkali Resisting Primer  Sealer is ideal as a high quality primer prior to painting. Resistant to solvents and salts.

Recommended Use

Coo-Var Alkali Resisting Primer Sealer is ideal for use on walls and plaster.

Features

• For interior and exterior use
• Suitable Surfaces: Plaster, Masonry
• Finish: Matt
• Application: Brush or Roller
• Drying time: Touch Dry 30 mins or 4 hours hard dry
• Overcoat time: 4-6 hours
• Estimated Coverage: 10m² per litre

Surface Preparation

Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting.

Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly.

Mixing Instructions

Mix well before use. 

Application Conditions

As dictated by normal good painting practice. Care must be taken during application that the temperature is above the dew point to avoid any contamination. In confined spaces, provide adequate ventilation during application and drying.