Rustoleum - 5150 is a fast setting, high strength concrete repair mortar provides a durable fast setting repair to frost spalled, eroded and cracked concrete, steps, troughs, ramps, coving etc.

Features

• Strong and quick repair of concrete
• Can be recoated within hours
• Does not shrink or crack
• Can be drilled after curing
• Easy all-in-1 packaging, including primer

Recommended Use

For repair of all damaged mineral and concrete surfaces, including with exposed reinforcing.

Surface Preparation 

The surface should be reasonably dry, clean and free of loose material. Smooth surfaces should be roughened.

Directions For Use

Shake the primer bottle before use. The liquid in the larger bottles should be mixed with the dry filler to achieve a dry trowelable mixture.

Application Conditions 

Temperature of material, air and substrate between 5 and 30°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dewpoint.

Application & Thinning: Rake/Trowel

Prime the surface by brush. Apply the mixed Speed Patch using compression with a trowel towork it into the repair area. Further compression causes the surface to becomewetter which makes finishing easier. The mixed components will remain usable for 10-15 minutes according to temperature and volume of material.

Techincal Data

Density (g/cm³): 2,36

Compressive Strength: 42 MN/m²

Dry Times By 20º C/RV 50%

Dry to recoat: 1 hour Fully cured: 1 hour Pot Life: 10 minutes

Recommended Wet Film Thickness 

5 - 50 mm

Reccomended Dry Film Thickness 

5 - 50 mm

Theoretical Coverage

0,5 m² per 10 kg at a depth of 10 mm.

Safety Data

• VOC level: 0 g/l
• Grenelle: C
• Remarks regarding safety: Consult Safety Data Sheet and Safety Information printed on the can