Rustoleum - Pegagraff Hydro Graffiti Cleaner is a clear, satin gloss, two-component waterborne polyurethane acrylic lacquer for floors, walls and a range of other surfaces.

Features

• Colourless anti-graffiti protection for porous concrete, natural stone, brick, interior wood, various coatings and paints
• Good UV resistance
• Acid resistant
• Alkali resistant

Recommended Use 

a) Colourless anti-graffiti protection of many substrates

b) Colourless varnish giving very good protection for floors, walls and interior surfaces.

Surface Preparation

Apply on a dry, clean and degreased substrate. Glossy and satin surfaces should be roughened up previously. When applying Pegagraff Hydro on masonry paint, this should first be insulated with a coat of Paracem. When repainting surfaces protected with Pegagraff Hydro, first an adhesion primer in Pegalink has to be applied. Not painted metal substrates such as steel, aluminium, stainless steel, cupper etc. have to be treated with a suitable paint before applying Pegagraff Hydro.

Directions For Use 

Add the component B (small packing) completely and progressively to component A (large packing) with an electric stirrer. Allowthe mixture to rest for about 5 minutes (defoaming). Although the mixture does not showa clearly perceptible thickening after 2 hours, we advise not to use the mixture anymore because of a diminished solvent resistance and reduced flow.

Application Conditions

> 5°C, < 80% R.H.

Apply in awell-ventilated place.

Application & Thinning: Brush 

All types can be used. Do not dilute.

Application & Thinning: Roller

Preferably apply with a short haired roller. Do not diluted.

Application & Thinning: Airless Spray

Nozzle: 09 - 013 / Pressure: 120 - 180 bars. Do not dilute.

Application & Thinning: Air-Atomised Spray 

Do not dilute.

Theoretical Coverage

5 - 8 m²/l

Practical Consumption

Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.