We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New
PPG - Sigma AquaCover 20 - Pre Treated Steel Primer
  • PPG - Sigma AquaCover 20 - Pre Treated Steel Primer

PPG - Sigma AquaCover 20 - Pre Treated Steel Primer

Review (0)
£67.35
Tax excluded
£80.82 Tax incl.

PPG - Sigma AquaCover 20 - Pre Treated Steel Primer is a one component, waterborne, high-build, zinc phosphate primer/coating for pre-treated steel.

Custom Colour

Please enter your required colour into the box below and click Submit Colour
You can find our colour charts here
  • 250 char. max
Size :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Sigma AquaCover 20 - Pre Treated Steel Primer is a one component, waterborne, high-build, zinc phosphate primer/coating for pre-treated steel.

Features

  • Particularly suitable when solvents are not permitted because of health and safety reasons.
  • Excellent adhesion to well-pretreated steel
  • Good anticorrosive properties
  • Fast-drying
  • Can be overcoated with most waterborne acrylics, solvent-borne epoxy coatings and alkyd paints, as well as certain solvent-borne, two-component products.

Recommended Substrate Conditions & Temperatures

Substrate conditions

  • Steel; blast cleaned to ISO-Sa2½, blasting profile 40 – 70 µm (1.6 – 2.8 mils)
  • Steel; pretreated according to ISO-St3
  • Shop primed steel; sweep blasted or power tool cleaned to SPSS-Ss or SPSS-Pt2

Substrate Temperature & Application Conditions

  • Substrate temperature during application and curing should be above 5°C (41°F)
  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point
  • Relative humidity during application and curing should not exceed 75%

Instructions For Use

  • Stir well before use
  • The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
  • Too much tap water results in reduced sag resistance
  • Must be protected from freezing at all times during storage and/or transport

Application

Air spray

Recommended Thinner

Tap water

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

1.8 – 2.0 mm (approx. 0.070 – 0.079 in)

Nozzle pressure

0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

Airless spray

Recommended Thinner

Tap water

Volume of thinner

0 - 5%, depending on required thickness and application conditions

Nozzle orifice

Approx. 0.46 – 0.53 mm (0.018 – 0.021 in)

Nozzle pressure

12.0 - 15.0 MPa (approx. 120 - 150 bar; 1741 - 2176 p.s.i.)

Brush/roller

Long haired brush or polyether roller with rounded edges

Recommended Thinner

Tap water

Volume of thinner

 0 - 5%

Cleaning solvent

Tap water

PPG Paints
PPG-SA2

Specific References

No customer reviews for the moment.

Write your review
PPG - Sigma AquaCover 20 - Pre Treated Steel Primer

8 other products in the same category:

arrow_back
arrow_forward
PPG - Sigma AquaCover 20 - Pre Treated Steel Primer

PPG - Sigma AquaCover 20 - Pre Treated Steel Primer

£67.35
Tax excluded
£80.82 Tax incl.