We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    Teknos - Nature Matt - Wood Floor and Parquet Lacquer
    • Teknos - Nature Matt - Wood Floor and Parquet Lacquer

    Teknos - Nature Matt - Wooden Floor Coating

    Review (0)
    £95.80
    Tax excluded
    £114.96 Tax incl.

    Teknos - Nature Matt - Wooden Floor Coating is a single pack wooden floor and parquet lacquer. Easy to apply, very tough Matt finish and suitable for most interior domestic and commercial wooden floors.

    Size :
    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    Teknos - Nature Matt - Wooden Floor Coating is a single pack wooden floor and parquet lacquer. Easy to apply, very tough Matt finish and suitable for most interior domestic and commercial wooden floors.

    Surface Preparation and Application

    The wood surface must be dry, well sanded and free from sanding dust and other dirt.

    Untreated and clean-sanded surfaces:

    Fill the gaps with GAP parquet putty. Prime the wooden surface with Teknos water-based primer lacquer according to the instructions. Apply 1–2 coats of NATURE MATT along the grain of the wood.

    Treatment with NATURE MATT only:

    Apply one coat on sanded wooden surface with a roller. Intersand properly with grit 100–150, and apply another coat with a roller. Ensure even absorption of both coats.

    Factory lacquered parquets or previously lacquered floors:

    Clean the floor thoroughly. Intersand properly by using sandpaper or an abrasive net n:o 100–150. Remove the sanding dust with a vacuum cleaner and finish with a clean, lint-free, damp cloth. Apply one coat with a stainless steel trowel and after that 1–2 coats with a roller. In unclear situations, conduct preliminary tests to ensure proper adhesion to the substrate.

    Note! If the floor has previously been treated with oil, urethane or alkyd lacquer, the floor must be sanded to bare wood before lacquering.

    Repairing a surface:

    To restore a floor treated with NATURE MATT, first remove the scuffs and gaps by sanding the area gently with sandpaper grit 150. Then, apply NATURE MATT to the restricted area along the grain of the wood. In small, restricted areas NATURE MATT can be applied, for
    example, with a foamed plastic roller.

    Ensure that the previous lacquer coat has fully dried before applying a new one. Always stir lacquer thoroughly before use. Some rubber types in carpets and anti-slip materials may contain plasticisers that can cause permanent surface and colour damage to the lacquer and oil coat.

    Application conditions

    • The surface to be varnished has to be dry.
    • The moisture content of the wood should be 7 ±2 % by weight.
    • The temperature of the air, the surface and the lacquer shall be above +18 - 24°C and the relative humidity of the air 40 - 60% during the time of application and drying.
    Teknos
    TEK-NM

    Data sheet

    Type
    Water Based
    Size
    5L
    Colour
    Clear
    Finish
    Full matt
    Coverage
    One coat with lacquer roller: 6 - 8 m²/l
    One coat with steel trowel (maintenance lacquering): abt. 25 m²/l
    For Use On
    Wood
    Application Method
    Roller
    Interior/Exterior
    Both
    Recoat Time
    2hrs

    Specific References

    No customer reviews for the moment.

    Write your review
    Teknos - Nature Matt - Wooden Floor Coating

    13 other products in the same category:

    arrow_back
    arrow_forward
    Teknos - Nature Matt - Wood Floor and Parquet Lacquer

    Teknos - Nature Matt - Wooden Floor Coating

    £95.80
    Tax excluded
    £114.96 Tax incl.