We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New

Axalta - ViterFloor 1105 Acrylic Sealer

Review (0)
£109.33
Tax excluded
£131.20 Tax incl.

ViterFloor 1105 by Axalta is a single pack acrylic concrete dust sealer for concrete.

Size :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

ViterFloor 1105 by Axalta is a single pack acrylic concrete dust sealer for concrete.

Features and use:

  • Use on concrete floors in light traffic areas to stop dusting and dirt retention and to ease cleaning.
  • Rapid drying and gives a protective, translucent finish.
  • Resistant to petroleum spirit and lubricating oils.
  • Stops water penetration on exterior driveways and therefore reduces freeze-thaw damage.
  • Can be applied by brush or roller with little wastage.

Surface Preparation:

All surfaces to be coated should be dry and cleaned as necessary to remove all dust, oil, grease, loose laitance, salts or other contamination


Mixing:

Must be mixed thoroughly by using a mechanical agitator before use. Agitate periodically to ensure paint remains homogeneous.


Application Conditions:

  • The concrete surface must be dry and at least 4 weeks old. The moisture content of the concrete should not exceed 6% when measured 25mm below the surface (with e.g. a Protimeter measuring in 25mm drilled holes filled with gel), or 14% when measured with a surface moisture gauge (such as a Protimeter WME (Wood Moisture Equivalent) gauge).
  • Only apply in conditions of good ventilation which must be maintained during drying and curing. Do not apply when rain, mist, sleet or snow are imminent. During application and drying time of the paint coating, the surface should be dry, the Relative Humidity should not exceed 85% and the steel temperature should remain at least 3oC above the dew point. Paint temperature should ideally be at a minimum of 15ºC.


Application Methods:

  • While this product can be sprayed, it is recommended that application should be by roller, with brush for small areas and cutting-in at edges. Roller or brush application will achieve more effective wetting and substrate penetration.
  • Thinning is not normally recommended. In hot conditions, up to 20% 1006 Thinner may be added to aid substrate penetration.
Axalta Coating Systems
AXA-V1AS

Data sheet

Type
Acrylic
Size
20KG
Colour
Clear
Finish
Eggshell
Coverage
6-9 m2 /lt
For Use On
Concrete
Application Method
Brush, Roller & Spray
Recoat Time (20°c)
1hr
Interior/Exterior
Exterior

Specific References

Data Sheets Available for Download:


> VIEW ALL



No customer reviews for the moment.

Write your review
Axalta - ViterFloor 1105 Acrylic Sealer

16 other products in the same category:

arrow_back
arrow_forward

Axalta - ViterFloor 1105 Acrylic Sealer

£109.33
Tax excluded
£131.20 Tax incl.