Custom ColourPlease enter your required colour into the box below and click Submit Colour
You can find our colour charts here
Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)
- Weather resistance better than most synthetic enamels
- Good flow
- Good filling power
- High covering capacity
Painted substrates: apply directly on old sound paints; glossy paints will be roughed up slightly. Untreated substrates: on woodwork, apply a coat of Fassiprim Aqua XPE. Blockwood knots and sap streaks with Zinsser primer B-I-N.For stain, graffiti blocking and/or very fast recoating, use Zinsser primers Bulls Eye 123 or 123 Plus.
Directions For Use
To ensure homogeneity, coating materials should be thoroughly stirred prior to use.
> 10°C, < 80% H.R.
Application & Thinning: Brush
Do not dilute.
Application & Thinning: Roller
Do not dilute.
Application & Thinning: Airless Spray
Nozzle: 018 / Pressure: 180 bars.
If required dilute with some water.
Application & Thinning: Air-Atomised Spray
Dilute with water.
- Density (g/cm³): 1,25 - 1,32
- Gloss Level: Satin
- Gloss level at 60º: Satin gloss: 30%
- Solids Content in weight: 47 - 51 %
- Solids content in volume: 31 - 34 %
Dry Times By 20º C/RV 50%
- Touch dry: 1 hour
- Dry to handle: 5 hours
- Dry to recoat: 24 hours
- Fully cured: 2 days
Recommended Wet Film Thickness
Recommended Dry Film Thickness
9 - 12 m²/l
Practical coverage depends on many factors such as porosity and roughness of the substrate and material losses during application.
- Water Based
- Custom Colour
- 9 - 12 m²/l
- For Use On
- Application Method
- Brush, Roller & Spray
- Recoat Time (20°c)
- Within 24hrs
Data Sheets Available for Download:
No customer reviews for the moment.