We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New
PPG - Phenguard 930 - Epoxy Foundation Primer
  • PPG - Phenguard 930 - Epoxy Foundation Primer

PPG - Phenguard 930 - Epoxy Foundation Primer

Review (0)
£117.44
Tax excluded
£140.93 Tax incl.

PPG - Phenguard 930 - Epoxy Foundation Primer is a high build, two-component amine adduct cured phenolic epoxy primer coat in the PHENGUARD tank coating system.

System Specification

Size :
Standard Colours :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Phenguard 930 - Epoxy Foundation Primer is a high build, two-component amine adduct cured phenolic epoxy primer coat in the PHENGUARD tank coating system.

Features

  • Excellent resistance to a wide range of organic acids, alcohols, edible oils, fats (regardless of free fatty acid content) and solvents
  • Maximum cargo flexibility
  • Low cargo absorption
  • Good resistance to hot water
  • Recognized corrosion control coating (Lloyd's register)
  • Good application properties, resulting in a smooth surface

Recommended Substrate Conditions and Temperatures 

Substrate conditions

  • Steel should be blast cleaned in situ to at least ISO-Sa2½
  • Blasting profile 50 – 100 µm (2.0 – 4.0 mils)
  • Steel must be free from rust, scale, shop primer and any other contamination
  • The substrate must be perfectly dry before and during application of PHENGUARD 930

Substrate temperature and application conditions

  • Substrate temperature during application and curing should be above 10°C (50°F)
  • Substrate temperature during application and curing should be at least 3°C (5°F) above dew point

Instructions For Use

Mixing ratio by volume: base to hardener 88:12

  • The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
  • Adding too much thinner results in reduced sag resistance and slower cure
  • Thinner should be added after mixing the components

Air spray

Recommended thinner

THINNER 91-92

Volume of thinner

0 - 10%, depending on required thickness and application conditions

Nozzle orifice

2.0 mm (approx. 0.079 in)

Nozzle pressure 0.3 MPa (approx. 3 Bar; 44 p.s.i.)

Airless spray

Recommended thinner

THINNER 91-92

Volume of thinner 0 - 10%, depending on required thickness and application conditions

Nozzle orifice

Approx. 0.46 – 0.53 mm (0.018 – 0.021 in)

Nozzle pressure

15.0 MPa (approx. 150 bar; 2176 p.s.i.)

Brush/roller

Brush: for stripe coating and spot repair only

Recommended thinner

THINNER 91-92

Volume of thinner

0 – 5%

Cleaning solvent

THINNER 90-53

PPG Paints
PPG-P9EFP

Data sheet

Type
amine adduct-cured novolac phenolic epoxy
Size
4L & 20L
Colour
Offwhite
Finish
Low Sheen
Coverage
6.6 m²/l for 100 µm (265 ft²/US gal for 4.0 mils)
For Use On
tank coating
Application Method
Brush, Roller & Spray
Recoat Time
36 hours

Specific References

No customer reviews for the moment.

Write your review
PPG - Phenguard 930 - Epoxy Foundation Primer

You might also like

9 other products in the same category:

arrow_back
arrow_forward
PPG - Phenguard 930 - Epoxy Foundation Primer

PPG - Phenguard 930 - Epoxy Foundation Primer

£117.44
Tax excluded
£140.93 Tax incl.