Anti-Corrosive Protective Barrier Paint is a Urethane Alkyd MIO (micaceous iron oxide) single pack, white spirit based coating for steelwork.

Brush or spray applied the MIO pigment provides excellent anti-corrosive protection and intercoat adhesion

Tolerant of damp surfaces for brush application. Overcoat only with other white spirit based products

Surfaces to be coated must be clean, dry and free from any material such as oil, grease, salts and dirt that might affect adhesion.

Remove loose flaking or friable material. Where necessary, remove weld spatter and grind smooth all rough, sharp edges and weld seams.

Galvanised steel

Thoroughly degrease with cleaner and lightly abrade any very shiny areas.

Mild Steel

Degrease with cleaner and either manually abrade or blast clean to Sa2½ (ISO 8501-1:2007)

If blast cleaning is not possible, phosphating is recommended for cold rolled steel to improve adhesion.

Phosphate Steel

Degrease with cleaner and manually abrade prior to application of the Primer Coat

Stainless Steel

Degrease with cleaner and manually abrade.

Aluminium and Alloys

Degrease with cleaner and manually abrade.

The temperature of the ambient air, surface or paint should not fall below 5ºC during application or drying.