Axalta ViterLac ABV is a high gloss finish coating, containing high build properties when applied by brush or spray. This product is ideal for structural steelwork.

Features and Use:

• Where a relatively fast drying high build gloss finish is required.
• Fast drying minimises dust contamination to give a durable high gloss finish.
• For use as a finish coat over ViterPrime 035 and other alkyd primers.
• For application by airless spray with a high degree of sag resistance for spraying on difficult configurations.
• Suitable for agricultural and earth moving equipment and general use.
• Ideal for structural steelwork.

Surface Preparation:

• This product is a finish coat and should be applied over an appropriate primer and/or intermediate coat.
• All surfaces to be coated should be dry and cleaned as necessary to remove all oil, grease, salts, weld flux or other contamination.

Application Methods:

• Airless Spray: Output fluid pressure at tip 1800-2500 psi min., Tip Size 11-19 thou (0.28-0.48 mm).
• Application by brush will provide 50-60 microns dft.
• Avoid exceeding maximum dry film thickness or drying problems may result.

Product Notes:

Overcoating:

This product is designed as a finish coat. If overcoating, the compatibility of topcoats should be confirmed prior to application

Other:

• Some shades may contain lead based colourants and these are labelled (L).
• Not recommended for immersion.
• For best opacity use a primer or undercoat of a suitable shade.

Health & Safety:

Containers are provided with safety labels which should be observed. Further information about hazardous influences and protection are detailed in individual Product Safety Data Sheets. A Safety Data Sheet for this product is available on request from Spencer Coatings.

Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.