We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

  • New

PPG - Sigma Aquacover 45 - Machinery Coating

Review (0)
£78.75
Tax excluded
£94.50 Tax incl.

Sigma Aquacover 45 is a one-component waterborne acrylic dispersion finish.

– finish for interior accommodation, machinery spaces and superstructure
– particularly suitable when solvents are not permitted because of health and safety reasons
– fast drying and recoatable
– good weather resistance
– good colour retention
– allows safer working during hull outfitting of new buildings
– certificate for low flame spread

Size :
Standard Colours :
Quantity :
  • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
  • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG Aquacover 45 is a one-component, waterborne acrylic dispersion finish for use in interior accommodation, machinery spaces and superstructure.

Principal Characteristics:

  • Particularly suitable finish when solvents are not permitted because of health and safety reasons.
  • Fast-drying and recoatable.
  • Good weather resistance
  • Good color retention
  • Allows safer working during hull outfitting of new-buildings.
  • One component waterborne acrylic dispersion finish
  • Use as a finish for interior accommodation, machinery spaces and superstructure
  • Particularly suitable when solvents are not permitted because of health and safety reasons
  • Fast drying and recoatable
  • Good weather resistance
  • Good colour retention
  • Allows safer working during hull outfitting of new buildings
  • Certificate for low flame spread: see sheet 1883.
  • Theoretical spreading rate 6.8 m2 per litre at 50 microns
  • Touch dry after 6 hours at 5 degrees C, 3 hours at 10 degrees C, 1 hour at 20 degrees C.
  • Overcoating interval min. 6 hours.
  • Available in many BS4800 and RAL Colours
  • Available in 5 and 20 Litres


Color and Gloss Level:
White (other colours available on request)
Gloss

Recommended Substrate Conditions and Temperatures:
Compatible previous coat must be dry and free from any contamination.
Substrate temperature during application should be at least 5°C
Substrate temperature during application should be at least 3°C above dew point
Relative humidity during application should not exceed 75%

Instructions for use:
Stir well before use
The temperature of the paint should preferably be above 15°C, otherwise extra thinner may be required to obtain application viscosity.
Too much tap water results in reduced sag resistance.
Adequate ventilation must be maintained during application and curing.
Must be protected from freezing at all times during storage and/or transport.

Application:

Sigma AquaCover 45 can be applied using airless spray, long haired brush or roller with rounder edges and has an ultra fast drying time of just 1 hour to touch at 20°C and is ready for an overcoat after just 6 hours. Sigma AquaCover 45 has a theoretical coverage rate of 6.8m2 per litre and is available in a selection of shades suitable for use on metal.

Surface and Environment:

Sigma AquaCover 45 is designed for use in industrial or commercial exposures for use on various types of primed steel to offer a protective coating that works to protect against weathering that can weaken the substrate, all the while retaining colour retention.

PPG Paints
PPG-SA4

Specific References

No customer reviews for the moment.

Write your review
PPG - Sigma Aquacover 45 - Machinery Coating

16 other products in the same category:

arrow_back
arrow_forward

PPG - Sigma Aquacover 45 - Machinery Coating

£78.75
Tax excluded
£94.50 Tax incl.