Orders before 12pm dispatched same day

Call us 01392 822600

PPG - Sigma Aquacover 45 - Machinery Coating

PPG - Aquacover 45 - Machinery Coating

Review (0)

£344.44

Tax excluded

£413.33 Tax incl.

PPG - Aquacover 45 - Machinery Coating is a one-component, waterborne acrylic dispersion finish/topcoat for use in interior accommodation, machinery spaces and superstructure.

Custom Colour

Please enter your required colour into the box below and click Submit Colour
You can find our colour charts here

Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

PPG - Aquacover 45 - Machinery Coating is a one-component, waterborne acrylic dispersion finish/topcoat for use in interior accommodation, machinery spaces and superstructure.

Features

Finish for interior accommodation, machinery spaces and superstructure
Particularly suitable when solvents are not permitted because of health and safety reasons
Fast-drying and recoatable
Good weather resistance
Good color retention
Allows safer working during hull outfitting of new-buildings

Recommended Substrate Conditions and Temperatures

Substrate conditions

Compatible previous coat must be dry and free from any contamination

Substrate temperature and application conditions

Substrate temperature during application should be at least 5°C (41°F)
Substrate temperature during application should be at least 3°C (5°F) above dew point
Relative humidity during application should not exceed 75%

Instructions For Use

Stir well before use
The temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
Too much tap water results in reduced sag resistance
Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)
Must be protected from freezing at all times during storage and/or transport

Air spray

Recommended thinner

Tap water

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

1.8 – 2.0 mm (approx. 0.070 – 0.079 in)

Nozzle pressure

0.3 - 0.4 MPa (approx. 3 - 4 bar; 44 - 58 p.s.i.)

Airless spray

Recommended thinner

Tap water