Rustoleum 3333 is a super adhesive floor primer for use on dense, smooth floors like power-floated concrete, quarry tiles and ceramic tiles. Product can be used in combination with all Rust-Oleum or Mathys epoxy and polyurethane coatings. For any other coating, we recommend a test for suitability.
Surface Preparation
Remove grease, oil and all other surface contaminations with Rustoleum FK 111 Fungicidal Cleaning Solution or by alkaline or high pressure (steam) cleaning. New concrete should cure and dry for at least 30 days prior to the application of the coatings. The surface must be clean and may be slightly damp during application.
Direction for use
Stir individual components thoroughly before mixing them together. Use the boxing method or a low speed mixer. Mixing ratio: Base: activator (3301) = pre-measured quantities. Pot-life: 2 hours for a 5 ltr. mix at 20 °C., after 2 hours the material should not be used anymore.
Reviews
There are no reviews yet.