Bollom Flameguard Ultra Vinyl Matt is a top coat for Bollom Broflame Ultra Basecoat on bare and previously painted wood, and Bollom Brosteel Ultra 60 for steel. Bollom Flameguard Ultra Vinyl Matt can also provide Class 0 on bare and previously painted non-combustible surfaces.
Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal
Ensure that the product to be coated is even and fully dry.
Over bare and previously painted non-combustible surfcaces
Ensure the surface to be painted is sound, clean, dry and free from grease or any substance liable to give adhesion problems. Scrape off any old or flaking paint until you have a firm well adhered surface; if in doubt remove all existing coatings. For existing gloss and eggshell finishes wet abrade and rinse with clean water to remove any residues. Always apply Bollom Flameguard Ultra Primer / Undercoat prior to applying Bollom Flameguard Ultra Vinyl Matt.
Stir well before use.
Applied by brush or roller.
Flameguard Ultra Vinyl Matt must not be thinned.
Coverage rates must be adhered to in order to achieve the fire rating.
Throughout the period of application and drying the ambient and substrate temperature should be between 5-30°C with ambient relative humidity below 75%.
12m² per litre / per coat.
Over Bollom Broflame Ultra Basecoat, Bollom Brosteel Ultra 60 and Bollom Fireshield Ultra Universal one coat is normally sufficient but for dark contrasting colours two maybe required.
For use over bare and previously painted non-combustible surfaces two coats are required over Bollom Flameguard Ultra Primer / Undercoat.
How do I get Fire Certification?
It’s simple, just keep proof of purchase, batch numbers of the products used along with site details and contact the Customer Services Department on 0191 410 6611 with the information and they will send you the relevant Certificate of Supply within 5 working days.