Showing 1–12 of 23 results

Show sidebar

Axalta – ViterThane PDV Anti Graffiti Coating

£91.10
ViterThane PDV Anti-Graffiti finish is a two pack polyurethane coating with very high gloss and excellent graffiti protective properties.
  • High impact and abrasion resistance and superb colour and gloss retention
  • Excellent chemical and solvent resistance
  • Low temperature curing down to -5ºC
  • For anti-graffiti properties on bridgework or other structures
  • Apply PDV in a colour as an anti-graffiti finish over an appropriate primer/intermediate, or apply PDV Clear over a coloured coat of ViterThane PLV or ViterThane PLS, to provide a UV stable anti-graffiti finish
Best uses Use this product to provide an anti-graffiti durable finish to steel substrates in the general industrial sector.

Axalta – ViterShield GPL – 5L

£37.25
ViterShield GPL is a two pack epoxy semi-gloss finish for use on steelwork, bund walls and floors.
  • Use as a chemically resistant finish over suitable systems such as appropriate ViterShield epoxy primers
  • Suitable for urban, industrial and marine environments and is suitable for immersion
  • Suitable coat-on-coat for bund walls (subject to chemical resistance to the stored materials)
  • Withstands immersion in dilute solutions of non-oxidising acids, alkalis and salts, accidental splashes of oxidising acids and bleaching agents,and is resistant to attack from gases and chemically active dust (at normal temperatures of around 20ºC)
  • Withstands neutral, vegetable and mineral greases,and immersion in oil,aliphatic solvents and splashes of aromatic solvent
Best uses ViterShield GPL epoxy finish is a chemical resistant topcoat, ideal for the general industrial sector and steel and concrete substrates.   From

PPG – Sigmafast 205 LT – Tintable Shades

From £70.83
Sigmafast 205 LT is a two component high build polyamide cured zinc phosphate epoxy primer & coating Best uses Sigmafast 205 LT is for external, atmospheric conditions. This product offers high durability, fast-drying and easy application. Suitable as a primer & topcoat in one.

PPG – Sigmacover 456 – Standard Colours

From £69.16
Sigmacover 456 is a two component high build polyamide cured recoatable epoxy coating for metal and concrete structures that have been exposed to marine or atmospheric conditions. – general purpose epoxy build coat or finish in protective coating systems for steel and concrete structures exposed to atmospheric land or marine conditions easy application, both by airless spray and brush – cures even at temperatures down to -10°C – a high relative humidity max. 95%, during application and curing does not influence the quality of the coating – good adhesion on most aged, sound alkyd-, chlorinated rubber- and epoxy coatings can be recoated with various two component and conventional coatings even after long weathering periods – resistant to water and splash of mild chemicals – excellent durability – tough, with long-term flexibility

PPG – Phenguard 935 – Epoxy Primer

From £85.03
Phenguard 935 by PPG Sigmaguard is a two component high build amine adduct cured phenolic epoxy coating. Best uses Fantastic resistance to a large range of edible oils, organic acids, solvents and fats, working as an anti-corrosion tool with maximum cargo flexibility.

PPG – Sigma EP 112 Miocoat – Epoxy Coating

From £55.38
Sigma EP 112 miocoat is a durable, two component, high solids, micaceous iron oxide, pigmented polyamine, cured recoatable epoxy coating for steel and concrete structures.

PPG – Sigma EP 110 Primer

From £58.17
The Sigma EP 110 primer is a two component zinc phosphate blast primer & sealer

PPG – Sigmazinc 109 HS – Zinc Epoxy Primer

£165.82
Sigmazinc 109 HS is a two component high solids polyamide adduct cured zinc epoxy primer

PPG – Sigmazinc 19 – Zinc Rich Epoxy Primer

£55.33
PPG SigmaZinc 19 Zinc Rich Epoxy contains 90% zinc offer excellent anti-corrosive properties and can be applied to all types of steel surfaces and surfaces coated with zinc epoxies and zinc silicates.

PPG – Sigmafast 205 LT – Anti-Corrosive Primer & Coating

From £154.15
Sigmafast 205 LT is a two component high build polyamide cured zinc phosphate epoxy primer & coating Best uses Sigmafast 205 LT is for external, atmospheric conditions. This product offers high durability, fast-drying and easy application. Suitable as a primer & topcoat in one.

PPG – Sigmadur 520

From £55.12
Sigmadur 520 is a two component high build semigloss aliphatic acrylic polyurethane finish. –easy application by roller and airless spray –unlimited recoatable –excellent resistance to atmospheric exposure conditions –good colour and gloss retention (aluminium version becomes grey) –non-chalking, non-yellowing –cures at temperatures down to -5°C –tough and abrasion resistant –resistant to splash of mineral and vegetable oils, paraffins, aliphatic petroleum products and mild chemicals –can be recoated even after long atmospheric exposure Best uses Sigmadur 520 semi gloss can be used in temperatures down to -5 degrees celsius. Suitable for sunlight exposure due to the non-yellowing features, this product is highly weather-resistant and can be applied using brush, spray or roller.

PPG – Sigmadur ONE – Polyester Topcoat

£74.40
Sigmadur ONE is a one pack urethane polyester finish coat for on board maintenance. –easy to apply on topsides, decks and superstructures –easy application by brush and roller –excellent flow and levelling properties –quick drying –good adhesion on most aged, sound alkyd, epoxy and polyurethane coatings –high gloss –good colour and gloss retention Best uses A truly unique product, Sigmadur ONE is suitable for application on decks, topsides, superstructures and can be applied to all types of ship during on board maintenance. This quick drying product is compatible with existing aged coatings.