We use cookies to improve your experience on our website. By browsing this website, you agree to our use of cookies.  Learn More

    Flexcrete - Curing Membrane WB - Acrylic Resin
    • Flexcrete - Curing Membrane WB - Acrylic Resin

    Flexcrete - Acrylic Curing Membrane

    Review (0)
    £61.80
    Tax excluded
    £74.16 Tax incl.

    Flexcrete Acrylic Curing Membrane is a specially formulated, water based Curing compound utilising advanced acrylic copolymers, which is designed for use with the Flexcrete Repair & Protection System. It is non-degrading, enabling it to be used externally as a sealer or readily overcoated with specialist Membranes from the Flexcrete range.

    Size :
    Quantity :
    • Secure Payments - Payments safe and secure as all transactions are encrypted to the highest global standard.
    • Delivery policy - We aim to ship all products same day where possible (Orders must be placed before 12pm)

    Flexcrete Curing Membrane WB is a non-degrading formulated acrylic resin sealer, which forms an elastic, durable matrix within the surface of cementitious substrates. When used with Flexcrete Repair Mortars and Coatings, it conforms to the requirements for water retention given in ASTM C309. The product is water based and has BBA Certification making it ideal for use in confined areas. When cured, it shows excellent resistance to blushing and weathering and can also be used as a sealer coat for concrete.

    Advantages

    • Spray as supplied onto freshly placed repair mortars, fairing coatings, cementitious coatings or concrete.
    • Convenient alternative to the use of traditional curing aids such as polythene sheeting, damp hessian or sand.
    • Non-yellowing, stable product not significantly altering the appearance of mortar/concrete.
    • Retains over 85% of the water in the repair mortar during the first 72 hours.
    • Safe, water-based product ideal for use in confined areas.
    • Non-degrading membrane which enhances adhesion when overcoated with Flexcrete specialist Membranes.

    Placing and Overcoating

    Curing Membrane WB should be spray applied to the surface of newly placed Flexcrete cementitious mortars and coatings. Application should take place as soon as practicable after final finishing, once any residual surface water from trowelling has evaporated, but generally within 15 minutes. Apply using a conventional pressure spray with a fine nozzle at 5-7m²/litre, taking care to ensure complete and even application. Best results are achieved by holding the nozzle approximately 0.5 to 1m from the surface, whilst spraying backwards and forwards over small measurable sections (1 to 5m²). For maximum curing efficiency, if the surface is subject to strong sunlight or drying winds, a second coat should be applied once the first coat has dried and the membrane film has formed. This waiting time is generally 15 minutes, whilst the first coat is still tacky, depending upon climatic conditions. Treated surfaces must be cured for a minimum of 72 hours before overcoating with a Flexcrete specialist membrane to ensure maximum adhesion.

    Flexcrete
    FLE-CMWB

    Data sheet

    Type
    Water Based
    Size
    5L
    Colour
    Natural
    Finish
    Satin
    Coverage
    7 m²/L
    For Use On
    Concrete
    Application Method
    Spray
    Interior/Exterior
    Both

    Specific References

    No customer reviews for the moment.

    Write your review
    Flexcrete - Acrylic Curing Membrane

    13 other products in the same category:

    arrow_back
    arrow_forward
    Flexcrete - Curing Membrane WB - Acrylic Resin

    Flexcrete - Acrylic Curing Membrane

    £61.80
    Tax excluded
    £74.16 Tax incl.