Teknos - Timantti 3 - Dispersion Primer. Water-borne acrylate dispersion primer for walls and ceilings indoors. Mildew-resistant. Full-Matt finish.

For priming unpainted concrete, plaster, filler, brick and building board surfaces. TIMANTTI 3 can be used as an adhesion primer for wall and ceiling surfaces previously painted with alkyd or dispersion paints. Also suitable for priming surfaces that are to be wallpapered or to which a stick-on wall covering (e.g. a non-woven wallpaper) is attached. TIMANTTI 3 can also be applied on galvanized sheet metal surfaces, such as air condition pipes.

Surface Preparation

Clean the surface from dirt and dust. Wash previously painted, dirty surfaces with RENSA SUPER paint cleaner. Matt down hard or gloss surfaces by sanding and thereafter remove the dust. For smoothing of irregularities in the surface choose a suitable filler from the SILORA series. The dried filler is sanded down and the dust removed. Steel surfaces are primed with FERREX AQUA Anticorrosive paint. TIMANTTI 3 is a water-borne paint. Coatings, which are not waterproof, such as old unpainted ceiling stopper or glue paint coats, must be removed before applying TIMANTTI 3. Alternatively FUTURA 3 adhesion primer can be used as an insulation primer.

Application

Before use stir the paint thoroughly. The paint can be diluted with water, if required, but dilution may impair the coverage of the paint. Apply by roller, spray or brush. Recommended nozzle size for airless spray is 0.017 - 0.021''. Surfaces primed with TIMANTTI 3 are top coated with top coats from TIMANTTI series. For top coating can also be used other Teknos´ interior paints which otherwise suit the object in question and the chosen coating system. TIMANTTI 3 is white and full-matt and hence can be used also as a top coat e.g. on ceilings.

Contact us today for help and advice via our website or contact page. Maker Coating Systems has been supplying high quality products to customers for decades, so you can rely on our team of advisors to help you find the right product for the job.

About us

Maker Coating Systems Ltd is a Devon based, family run business that began in 1979, since then we’ve become a leading independent distributor of specialist maintenance and refurbishment products throughout the South of the UK. We supply a huge range of quality materials to successfully resolve virtually any maintenance and refurbishment issue, whether it involves refurbishment of marine structures, civil engineering issues, refurbishment of floors, water proofing flat and shallow pitched industrial roofs, cladding maintenance, concrete repairs, anti-corrosion work or chemically resistant products, we can provide the systems to allow the long term, successful completion of the project. Our product ranges are drawn from well-known manufacturers that have a solid track record in the production of quality products.