Rustoleum - Noxyde is a single pack water-based elastomeric coating based on a modified acrylic binder with unequalled corrosion protection.

Reccomended Use

1. On iron, steel, special alloys, galvanised and metallised iron and steel, aluminium, copper, zinc, lead, etc. as rust prevention or waterproofing. For outside and inside use.
2. Diluted with 25% water as an adhesion primer coat on slightly or non porous substrates such as glass, smooth bricks and concrete, ceramics, tiles, etc.

Features

• Ultimate corrosion protection, even in severe conditions
• 200% elastic coat does not crack or peel Excellent coverage of nuts, bolts and welds
• Dry fall: saves preparation & clean up time
• Primer and topcoat in one

Surface Preparation

Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning (max. 200 Bars) in combination with appropriate detergents. The substrate has to be dust free and made rust free by means of sandblasting (Sa2, St2) or high pressurewater jetting (min. 600 Bars). After jetting, the substrate has to be dust free. On newgalvanised surfaces, newzinc, aluminium, stainless steel, apply first a coat of Pegalink. On ferrous substrates, apply Noxyde in red or grey as the first coat. In all instances apply contrasting Noxyde colours for subsequent layers.

Directions For Use

To ensure homogeneity, coating materials should be thoroughly stirred prior to use.