Rensa Terrace is a very efficient detergent for washing of wooden terrace floors and garden furnitures before wood oil treatment. It removes dirt, mould, algae growth and other impurities that prevent the wood oil from absorbing to the surface.
Rensa Super is an efficient universal detergent for washing of all kind of building surfaces and for pre-treating surfaces before painting. For in- and outdoor use. Rensa Super is an evaporating detergent, which is not necessary to rinse with water. Using the detergent is quick and easy: wipe of the dirt, let it dry for 5 minutes and paint.
Rensa Roof is an efficient detergent for washing of tile roofs and previously painted very dirty sheet-iron roofs.
Rensa Façade is an efficient detergent for washing external surfaces of buildings and pre-treating surfaces before painting. It removes dirt, mould, algae growth and other impurities which may weaken the adhesion of the paint.
Rensa Anti-Mould kills mildew, lichen and algae growth from external surfaces of buildings. It is easy to spray on e.g. tile and felt roof, stone paving, brick wall or fence and let the growth be removed by the effects of weather. Rensa Anti-Mould disinfects the surface and gives a long-term protection.
Timantti W by Teknos is a water-borne acrylate based moisture sealer that forms a steam-proof film. The sealer is together with Timantti 20 included in a coating system for wet rooms, approved by the Swedish Måleribranschens Våtrumskontroll (MVK).
Corroless Thinners No. 4 is a solvent blend to optimise the thinning, cleaning and application properties of Corroless coatings. See the relevant product data sheet for recommended thinners.
Corroless Thinners No. 5 is a solvent blend to optimise the thinning, cleaning and application properties of Corroless coatings. See the relevant product data sheet for recommended thinners.
Thinner 7301 is a thinning product designed for use with the Rust-Oleum CombiColor product range, as a thinner or to clean up after use.
Viterclene C single pack of bio-degradable detergent wash for the efficient removal of dirt, oil or grease.
Maker Coating Clean & Etch is an etching solution designed to clean and degrease bare concrete surfaces to improve penetration and adhesion of coatings, paints, stains and sealants.